Description
Platforms Stage
Thanks to their structure, the platforms can be used both indoors and outdoors. The top of the platform is made of water-resistant plywood with a non-slip coating.
Compatible with 3 types of feet
The platforms can be supported by round, square or telescopic legs that allow for smooth and precise height adjustment. The rubber feet of the platforms ensure stability.
Characteristics of PLTS-1×0.5
| Material | Frame: Aluminum Top: 12 mm plywood with anti-slip coating |
|---|---|
| Dimensions | 1 m x 0.5 m |
| Thickness | 90 mm |
|
Distributed load
eligible
|
750 kg/m². |
| Finish | Aluminum / Black |
| Weight | 8 kg |
About security
In accordance with the NF E85-015 standard:
– A maximum height of 150 cm is allowed
– A guardrail must be installed if the height to be climbed is greater than 50 cm.
These provisions are not exhaustive. For other requirements, please refer to the standard mentioned above.
Attention to soil capacity:
A loose floor can affect the safety of the installation.
Please distribute the loads evenly over the entire platform surface.
About railings and stairs:
A guardrail must be installed as soon as the height of fall is higher than 50 cm.
A staircase less than or equal to 120 cm wide must have at least one handrail.
Resistance
Fire resistance :
Fire resistance class: BFL-S1 (corresponds to the French M1 class).
It complies with the European standard EN13501-1+A1:2010
Resistance Water resistance :
The top is made of birch multi-ply plywood filmed underneath and covered with a non-slip coating on top.
It is designed to withstand water splashes, so it can withstand the occasional rain.
It should not be immersed and installed for a long period of time or stored outdoors as it may swell and reduce the load capacity.
