Description
Platforms Stage
Thanks to their structure, the platforms can be used both indoors and outdoors. The top of the platform is made of water-resistant plywood with a non-slip coating.
Compatible with 3 types of feet
The platforms can be supported by round, square or telescopic legs that allow for smooth and precise height adjustment. The rubber feet of the platforms ensure stability.
Features of PLTS-2×1
| Material | Frame: Aluminum Top: 12 mm plywood with non-slip coating |
|---|---|
| Dimensions | 2 m x 1 m |
| Thickness | 90 mm |
|
Distributed load
eligible
|
750 kg/m². |
| Finish | Aluminum / Black |
| Weight | 32 kg |
About security
In accordance with standard NF E85-015 :
– A maximum height of 150 cm is permitted
– A guardrail must be installed if the height to be climbed exceeds 50 cm.
These provisions are not exhaustive. For other requirements, please refer to the standard mentioned above.
Pay attention to floor capacity:
A loose floor may affect the safety of the installation.
Please distribute loads evenly over the entire platform surface.
About railings and stairs :
A guardrail must be installed whenever the fall height exceeds 50 cm.
A staircase up to 120 cm wide must have at least one handrail.
Resistance
resistance:
Fire resistance class: BFL-S1 (corresponds to French M1 class).
It complies with European standard EN13501-1+A1:2010
Resistance
Water resistance:
The top is made of birch plywood, film-coated on the underside and covered with an anti-slip coating on the top.
It is designed to withstand splashing water, i.e. occasional rain.
It must not be immersed and installed for long periods, or stored outdoors, as this may cause it to swell and reduce its load-bearing capacity.
